The ideal option for guaranteeing very high thermal performance, even in thin coats, thanks to the graphite particles contained in the special, unstressed insulation slab. It ensures dimensional stability, perfectly flat surfaces, and secure gluing, even during maximum sunlight. The use of a single raw material ensures that the thermal properties remain uniform throughout the entire thickness of the slab. The absence of any surface cuts ensures a truly uniform product when skimming the external thermal insulation system, eliminating the risk of crackling caused by the infiltration of the skim coat into the cuts themselves.
The ideal option for high thermal performance that combines reduced thickness and easy installation. It features a special graphite panel with white surface — obtained through a unique lamination synthesis process — that ensures truly uniform thermal properties by combining the performance of graphite with the simplicity and easy installation of conventional white polystyrene. Compared to conventional EPS solutions, with the same applied thickness and type of substrate, insulating performance increases by 19% due to the innovative High Performance (HP) panel combined with the state-of-the-art adhesive-skim coat (Klebocem Termico) with thermal conductivity value λ = 0,23 W/(m·K) which ensures insulating performance four times higher than a standard adhesive-skim coat λ = 0,85 W/(m·K).
The ideal option for simply and effectively complying with the regulations on energy efficiency and noise pollution. The system includes an insulation panel made of EPS with low dynamic stiffness graphite, featuring a special grooved pattern, designed to give the optimal balance between thermal and acoustic insulation properties combined with maximum ease of installation and excellent reaction to fire. This option is also characterised by high resistance to impacts (20 joules). Sound insulation certificate
The ideal option for external surfaces with very high resistance to impacts and mechanical shocks, such as hail. The combination of the elasticity of the slab and the specifically formulated skim coat provides certified crack-free resistance that exceeds the values required by the regulations. It can be used together with other TermoK8 systems for building plinths, areas exposed to accidental impacts, areas in contact with the ground, as well as areas that require low water absorption. Impact resistance certificate
The ideal option for external surfaces with very high resistance to impacts and mechanical shocks, such as hail. The combination of the elasticity of the slab and the specifically formulated skim coat provides certified crack-free resistance that exceeds the values required by the regulations. It can be used together with other TermoK8 systems for building plinths, areas exposed to accidental impacts, areas in contact with the ground, as well as areas that require low water absorption. Impact resistance certificate
The ideal option for installing the TermoK8 system on external surfaces where chemical bonding would not guarantee the impermeability of the system; ideal for renovating exterior walls in particularly deteriorated condition, without the need for laborious and costly preparation work. Wind resistance certificate
The technical solution for modular façades that is quick and easy to install: lightweight, breathable, flexible, and multi-coloured.
The ideal option for combining the client’s specific aesthetic requirements with the technical ones of the design; exposed brick cladding, with its numerous finishes, gives the system strong emotional impact and a high degree of personal choice.
Ideal solution for external thermal insulation systems that meet energy efficiency regulations, characterised by cladding in Porcelain stoneware, in thin layers, large format, with a strong and personal architectural impact.
In collaboration with
Ideal solution for external thermal insulation systems that meet energy efficiency regulations, characterised by cladding in Porcelain stoneware, in thin layers, large format, with a strong and personal architectural impact.
In collaboration with
The ideal option for achieving specific customised exteriuiò ue rm itror finishes on the TermoK8® system using modular cladding materials; from rustic brick type finishes to those using ceramic elements in stoneware or clinker.
The ideal option for simply and effectively complying with energy efficiency requirements, providing all the benefits of a quality external thermal insulation system both in construction and in maintenance.
The technical solution for modular façades that is quick and easy to install: lightweight, breathable, flexible, and multi-coloured It is certified as reaction to fire class A2 S1 D0. The insulating panel is EPD (Environmental Product Declaration) certified
Ivas Industria Vernici Spa
