Fire resistance - Ivas
Ivas Insulated Renders

Fire resistance - Ivas

seo titolo secondo

 Fire resistance

hai cercato: Fire resistance indietro 

TermoK8 ® CLASSICO CONVERTO

Ivas

The ideal option for simply and effectively complying with energy efficiency requirements, providing all the benefits of a quality external thermal insulation system both in construction and in maintenance. 

  •   Cheapness
  •   Simplicity of installation
  •   Ecobonus 110%
  •   Fire resistance

  •   CAM approved panels
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® HP CONVERTO

Ivas

The ideal option for high thermal performance that combines reduced thickness and easy installation. It features a special graphite panel with white surface — obtained through a unique lamination synthesis process — that ensures truly uniform thermal properties by combining the performance of graphite with the simplicity and easy installation of conventional white polystyrene. Compared to conventional EPS solutions, with the same applied thickness and type of substrate, insulating performance increases by 19% due to the innovative High Performance (HP) panel combined with the state-of-the-art adhesive-skim coat (Klebocem Termico) with thermal conductivity value λ = 0,23 W/(m·K) which ensures insulating performance four times higher than a standard adhesive-skim coat λ = 0,85 W/(m·K).

  •   TermoK8® Design
  •   CAM approved panels
  •   Ecobonus 110%
  •   High insulation

  •   Simplicity of installation
  •   Fire resistance

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® grafite PLUS CONVERTO

Ivas

The ideal option for guaranteeing very high thermal performance, even in thin coats, thanks to the graphite particles contained in the special, unstressed insulation slab. It ensures dimensional stability, perfectly flat surfaces, and secure gluing, even during maximum sunlight. The use of a single raw material ensures that the thermal properties remain uniform throughout the entire thickness of the slab. The absence of any surface cuts ensures a truly uniform product when skimming the external thermal insulation system, eliminating the risk of crackling caused by the infiltration of the skim coat into the cuts themselves.

  •   TermoK8® Design
  •   CAM approved panels
  •   Ecobonus 110%
  •   High insulation

  •   Simplicity of installation
  •   Fire resistance

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® FONOSTOP CONVERTO

Ivas

The ideal option for simply and effectively complying with the regulations on energy efficiency and noise pollution. The system includes an insulation panel made of EPS with low dynamic stiffness graphite, featuring a special grooved pattern, designed to give the optimal balance between thermal and acoustic insulation properties combined with maximum ease of installation and excellent reaction to fire. This option is also characterised by high resistance to impacts (20 joules). Sound insulation certificate

  •   TermoK8® Design
  •   Ecobonus 110%
  •   CAM approved panels
  •   High insulation

  •   Fire resistance

  •   Thermo-acoustic insulation
  •   Impact resistance

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® CLASSICO 35 PLUS

Ivas

The ideal option for simply and effectively complying with energy efficiency requirements, providing all the benefits of conventional white polystyrene panels, but with greater insulation capacity. Particularly suitable for the subsequent Texture Design decorative finish.

  •   TermoK8® Design
  •   Cheapness
  •   Simplicity of installation
  •   Fire resistance

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® a.r. max 20 j

Ivas

The ideal option for external surfaces with very high resistance to impacts and mechanical shocks, such as hail. The combination of the elasticity of the slab and the specifically formulated skim coat provides certified crack-free resistance that exceeds the values required by the regulations.  It can be used together with other TermoK8 systems for building plinths, areas exposed to accidental impacts, areas in contact with the ground, as well as areas that require low water absorption. Impact resistance certificate

  •   Impact resistance

  •   Ecobonus 110%
  •   Fire resistance

  •   CAM approved panels
  •   TermoK8® Design
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® a.r. max 60 j

Ivas

The ideal option for external surfaces with very high resistance to impacts and mechanical shocks, such as hail. The combination of the elasticity of the slab and the specifically formulated skim coat provides certified crack-free resistance that exceeds the values required by the regulations.  It can be used together with other TermoK8 systems for building plinths, areas exposed to accidental impacts, areas in contact with the ground, as well as areas that require low water absorption. Impact resistance certificate

  •   Impact resistance

  •   Ecobonus 110%
  •   Fire resistance

  •   CAM approved panels
  •   TermoK8® Design
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® MECCANICO

Ivas

The ideal option for installing the TermoK8 system on external surfaces where chemical bonding would not guarantee the impermeability of the system; ideal for renovating exterior walls in particularly deteriorated condition, without the need for laborious and costly preparation work. Wind resistance certificate

  •   System for deteriorated substrated
  •   Fire resistance

  •   CAM approved panels
  •   Ecobonus 110%
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® HP GREEN

Ivas

The ideal solution for an ethical and sustainable approach to the design of EPS insulation systems: it uses slabs entirely derived from renewable raw materials according to the TÜV certified “Biomass Balance” method. Bio Masses effectively contribute to environmental sustainability, ensuring the saving of fossil fuel resources and reducing CO2 and greenhouse gas emissions. The topcoat with nanometre technology produces a photo-catalytic oxidising effect capable of breaking down organic substances, pollutants, and micro-organisms, ensuring clean surfaces and high air quality.

  •   Green building
  •   TermoK8® Design
  •   High insulation

  •   Simplicity of installation
  •   Fire resistance

  •   Reduced thicknesses

  •   Ecobonus 110%
  •   CAM approved panels
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® slim

Ivas

The ideal option for combining high thermal efficiency and low insulation thickness. Especially suitable for upgrading the energy efficiency of existing buildings, due to its reduced thickness with equivalent insulation performance. The insulating panel is EPD (Environmental Product Declaration) certified

  •   Ecobonus 110%
  •   High insulation

  •   Fire resistance

  •   Reduced thicknesses

  •   EPD certified panels
  •   CAM approved panels
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® FENOLICO

Ivas

The ideal option for combining high thermal efficiency and low insulation thickness. Particularly suitable in case of renovations due to the high thermal resistance performance of the phenolic panel. The insulating panel is EPD (Environmental Product Declaration) certified

  •   Reduced thicknesses

  •   Fire resistance

  •   Ecobonus 110%
  •   CAM approved panels
 

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® minerale l.v.

Ivas

The ideal option for cladding a building, providing high thermal and acoustic performance. The system is mainly of mineral composition and has excellent reaction to fire, impact resistance and water vapour permeability properties. The insulating panel is EPD (Environmental Product Declaration) certified

  •   TermoK8® Design
  •   Ecobonus 110%
  •   Green building
  •   Fire resistance

  •   EPD certified panels
  •   CAM approved panels
  •   Thermo-acoustic insulation
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® minerale l.r.

Ivas

The ideal option for cladding and insulating a building, with particular emphasis on the system’s thermal, acoustic and fire resistant properties, featuring high breathability and a predominantly mineral composition. The insulating panel is EPD (Environmental Product Declaration) certified

  •   TermoK8® Design
  •   Ecobonus 110%
  •   Fire resistance

  •   Thermo-acoustic insulation
  •   EPD certified panels
  •   Green building
  •   CAM approved panels
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® MODULAR FLEX L.R.

Ivas

The technical solution for modular façades that is quick and easy to install: lightweight, breathable, flexible, and multi-coloured It is certified as reaction to fire class A2 S1 D0. The insulating panel is EPD (Environmental Product Declaration) certified

  •   Ecobonus 110%
  •   EPD certified panels
  •   CAM approved panels
  •   Green building
  •   Fire resistance

  •   Thermo-acoustic insulation
  •   Modular design finishes

  •   TermoK8® Design
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

gg_share in_share pin_share tw_share fb_share

b2b

enter
img Ivas Industria Vernici Spa
  • Via Bellaria, 40
  • 47030 San Mauro Pascoli (FC) - Italia
  • ph. +39 0541 815811
  • fax +39 0541 815815
  • info@gruppoivas.com
follow us on:

references
download