COATINGS FOR INDUSTRY - Ivas
COATINGS FOR INDUSTRY
| BROCHURE
hai cercato: COATINGS FOR INDUSTRY indietro
High Thickness Self-Levelling Epoxy Procedure
High thickness, modified epoxy resin based, continuous coating for floors. Pigmented, waterproof, solvent free, with high mechanical and chemical performance. Can be applied to substrates of different physical format, intended for heavy traffic using heavy wheeled vehicles.
Intended for
Interior
-
food industries
-
chemical and pharmaceutical industries
-
mechanical engineering and warehouses
-
electronic engineering
-
garages and covered car parks
TECHNICAL DATA
-
Suitability of the substrate (concrete)
-
Residual moisture content: < 5%
-
Compressive strength: > 22 MPa
-
Surface resistance to tearing: > 1.5 MPa
-
Total thickness of coating: approx. 3 mm
| system sheet
Composition of the System
- 1 Stabiliser / Primer
Epoxy Fondo
- 2 Intermediate layer
Epoxy Fondo mortar
- 3 Wear layer
Epoplast mortar
- 4 Protective finish
(if required)
polyurethane enamel in water dispersion: Metroresin Matt K
or
Metroresin Gloss K
or
solvent based Paviglass
(matt or glossy)
Products of the System
Multi-Layer Procedure
Medium thickness, modified epoxy resin based, continuous coating for floors. Pigmented, waterproof, solvent free, with high mechanical and chemical performance. Can be applied to substrates of different physical format, intended for particularly heavy traffic with wheeled vehicles.
Intended for
Interior
-
Food and beverage industries
-
textile and paper mills
-
chemical and pharmaceutical industries
-
precision engineering industries
-
electronic engineering
-
garages and covered car parks
TECHNICAL DATA
-
Suitability of the substrate (concrete)
-
Residual moisture content: < 5%
-
Compressive strength: > 22 MPa
-
Surface resistance to tearing: > 1.5 MPa
-
Total thickness of coating: approx. 3 mm
| system sheet
Composition of the System
Products of the System
High Thickness Epoxy Screed
High thickness, continuous coating for floors. Waterproof, in a spreadable consistency and solvent free; with high mechanical resistance and extremely resistant to impact from heavy, intense traffic, rubbing, scratching and knocks.
Intended for
Interior
-
food and beverage industries
-
textile and paper mills
-
chemical and pharmaceutical industries
-
electronic engineering
-
mechanical engineering and industrial warehouses
TECHNICAL DATA
-
Suitability of the substrate (concrete)
-
Residual moisture content: < 5%
-
Compressive strength: > 22 MPa
-
Surface resistance to tearing: > 1.5 MPa
-
Total thickness of coating: from 6 mm to 8mm
| system sheet
Composition of the System
Products of the System