EPOXY BOND - Resinous Floors - Ivas
Ivas Industria vernici

EPOXY BOND - Resinous Floors Ivas

seo titolo secondo

Adhesion Promoting

you are looking for: Adhesion Promoting, EPOXY BOND indietro 

EPOXY BOND

  • EPOXY BOND
Two-component binder based on epoxy resins, free of solvents, transparent tending to yellow, for the realization of screeds of variable thickness. Specially formulated to be added in variable quantities to quartz sands, thus obtaining a mortar for industrial flooring with high mechanical strength. Used for the formation of slopes with thicknesses from 1 mm to any thickness before the application of resin coatings; repair of holes and depressions in industrial quartz pavements, Construction of joints between floor and wall before the construction of resin floors. It allows to realize thin thickness coatings with adhesions and compressive strengths much higher than structural cement mortars and industrial concrete. The use of Epoxy Bond makes it possible to coat and put into operation the coatings after a few hours of maturation. The TVOC value in class A+ contributes to compliance with the requirements of the protocols CAM, LEED and BREEAM. For indoor.
Main properties:
For the production of thick screeds
Catalysis ratio (weight):
A: B = 2 : 1
Colour range:
Transparent
Type of Equipment:
Manual or mechanical levelling bars and trowels.
Dilution:
Ready to use
Coverage:
as levelling (1:05 quartz 06)= 750gr/m2
as primer 250 gr/m2
as mortar (1:10 quartz 04) 16 Kg/m2/cm
CERTIFICATIONS
  •  
  •  
  •  
Check the icons guide here

Alternative Products

other products
img Ivas Industria Vernici Spa
  • Via Bellaria, 40
  • 47030 San Mauro Pascoli (FC) - Italia
  • ph. +39 0541 815811
  • fax +39 0541 815815
  • info@gruppoivas.com
follow us on: