Two-pack, elastic waterproofing cement-based skimming mortar for contact with drinking water. Suitable for waterproofing tanks used to hold drinking water in compliance with Italian Ministerial Decree dated 21/03/1973 and subsequent amendments thereto as per certificate no. 141921 issued by Istituto Giordano. It can also be used to waterproof floor substrates before paving. For indoor and outdoor use.
Elongation at break: 45% ± 5% / Tensile strength = 0.9 ± 0.1 MPa
Main properties:
Waterproofing against pressurized water: no penetration;
Resistance to water (positive pressure): 1.5 atm;
For drinking water
Granulometry (EN 13300 / EN 1062):
0.5mm
Colour range:
Grey
Type of Equipment:
serrated spatula, mechanical low speed mixer
Dilution:
Water
Mixing Ratio:
Pack A should only be mixed with pack B; 9 litres of pack B with 25 kg of pack A
Coverage:
1.75 kg/m2 per mm of thickness
Check the icons guide
here