Termok8 Forte Flex EPS: High-Resistance Facades Against Impacts and Weather
Insulated Renders Insulated Renders

TermoK8 ® FORTE FLEX EPS 60J/100J - Ivas

TermoK8 ® FORTE FLEX EPS 60J/100J

Ivas

Ideal solution for achieving facades resistant to impacts and mechanical shocks such as hail or other adverse weather conditions. It can be used in combination with other Termok8 systems for skirting buildings, portions exposed to accidental impact, those against the ground, as well as those requiring low water absorption. The combination of the elasticity of the Rasoflex skim coat and the strength of the Termok8 Forte Flex EPS system provides a resistance capable of preventing cracks from impacts of up to 60 and 100 Joules. The system complies with the highest certification standards, thanks to insulating materials that meet the Minimum Environmental Criteria. Fire classification of the thin reinforced plaster of the finishing: Euroclass A2 - s2 - d0. Impact resistance certificate.

  •   High insulation

  •   CAM approved panels
  •   Impact resistance

  •   Simplicity of installation

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

b2b

enter
img Ivas Industria Vernici Spa
  • Via Bellaria, 40
  • 47030 San Mauro Pascoli (FC) - Italia
  • ph. +39 0541 815811
  • fax +39 0541 815815
  • info@gruppoivas.com
follow us on: