COATINGS FOR FOOD INDUSTRY - Ivas

COATINGS FOR FOOD INDUSTRY

| BROCHURE

hai cercato: COATINGS FOR FOOD INDUSTRY indietro

High Thickness Self-Levelling Epoxy Procedure

High thickness, modified epoxy resin based, continuous coating for floors. Pigmented, waterproof, solvent free, with high mechanical and chemical performance. Can be applied to substrates of different physical format, intended for heavy traffic using heavy wheeled vehicles.

Intended for

Interior

food industries
chemical and pharmaceutical industries
mechanical engineering and warehouses
electronic engineering
garages and covered car parks

TECHNICAL DATA

Suitability of the substrate (concrete)
Residual moisture content: < 5%
Compressive strength: > 22 MPa
Surface resistance to tearing: > 1.5 MPa
Total thickness of coating: approx. 3 mm

| system sheet

Composition of the System

1 Stabiliser / Primer Epoxy Fondo
2 Intermediate layer Epoxy Fondo mortar
3 Wear layer Epoplast mortar
4 Protective finish
(if required) polyurethane enamel in water dispersion: Metroresin Matt K or Metroresin Gloss K or solvent based Paviglass
(matt or glossy)

Products of the System

Self-Levelling Water-Based Epoxy Procedure

High Thickness, continuous coating for self-levelling/multi-layer flooring, with modified epoxy resin in aqueous emulsion. Pigmented, waterproof. Superb mechanical and chemical performance, with smooth or antiskid surface.

Intended for

Interior

food industries
chemical and pharmaceutical industries
mechanical and electronics industries
garages and covered car parks
underground parking lots

TECHNICAL DATA

Suitability of the substrate (concrete)
Residual moisture content: < 5%
Compressive strength: > 22 MPa
Surface resistance to tearing: > 1.5 MPa
Total thickness of coating: approx. 3 mm

| system sheet

Composition of the System

1 Stabiliser / Primer Epoxy primer WB or Aquacem
2 Intermediate layer Aquacem autolivellante or Epoplast W
3 Wear Layer Epoplast W mortar
4 Finish protective
(if required) Metroresin Matt K or Metroresin Gloss K