Elastomeric filler base coat. High resistance, both mechanical and to abrupt changes in temperature. Its remarkable elasticity reduces the risk of cracks and fissures. In combination with Armatex micro mesh, it is used as an Ivas elastomeric process. The product has obtained the Eurofins certification for Indoor Air Comfort Gold as a guarantee that the product meets the low emission requirements, as well as the most relevant specifications in Europe; sign of attention to the quality of a healthy internal environment. For outdoor use.
Main properties:
High elasticity;
Resistant to ageing
Granulometry (EN 13300 / EN 1062):
75µ S1, Fine (< 100 μm)
Colour range:
White and Colours can be produced with the You Color tinting system
Type of Equipment:
brush, short-haired roller
Dilution:
Water; maximum 5% = 50 ml per litre of product
Coverage:
With the application of 2 coats: 2.5-3 m2/l
Coverage per pack:
(14 l): 42 m2, approx. Coverage varies according to substrate absorption.
Application Procedure:
Using a brush or roller, apply a first coat of IVASGUM FONDO diluted to a maximum of 5% depending on absorption of the substrate, followed by a second coat applied 12 - 18 hours later