Uniforming fibre-reinforced grey skim coat, with 0.6mm grain size. Suitable for skimming and filling old cement-based plasters (when not chalky), set plaster and new plaster. Achieves two-coat finishes. The maximum thickness of a single coat is 3 mm; greater thicknesses require installing an alkali-resistant glass fibre Armatex C1 mesh between the first and second coat. For indoor and outdoor use.
Main properties:
Fibre-reinforced skim coat
Ideal for old plasters
Granulometry (EN 13300 / EN 1062):
0.6mm
Thermal conductivity (λ) (EN 1745):
0.47 W/mK
Colour range:
White, Grey
Type of Equipment:
spatula, mason's trowel, trowel, mechanical low speed mixer
Dilution:
Water
Mixing Ratio:
22-24% with water; 5.5-6 Litres per 25Kg package
Coverage:
1.5 kg/m2 per mm of thickness
Check the icons guide
here