Ivas Industria vernici

System for high thermal insulation - Ivas

seo titolo secondo

 System for high thermal insulation

hai cercato: System for high thermal insulation indietro 

TermoK8 ® slim

Ivas

The ideal option for combining high thermal efficiency and low insulation thickness. Especially suitable for upgrading the energy efficiency of existing buildings, due to its reduced thickness for equivalent insulation performance.

  •   System with
    limited
    thickness
  •   System for high
    thermal
    insulation

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® grafite PLUS

Ivas

The ideal option for guaranteeing very high thermal performance, even with low thickness, through the use of graphite particles encapsulated inside the special detensioned insulation panel. It ensures dimensional stability, perfect flatness and secure adhesion, even during maximum solar irradiation. The use of a single raw material confers constancy of the thermal properties of the entire thickness of the slab. The absence of any surface processing ensures a truly uniform product when skimming the render, thus ruling out the risk of infiltrations as generally ensuing from skimming and which, in time, could cause crackling of the façade.

  •   System for high
    thermal
    insulation
  •   System easy
    to install
  •   System with
    limited
    thickness

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® FONOSTOP EPS

Ivas

The ideal option for simply and effectively complying with the regulations on energy efficiency and noise pollution. The system includes an insulation board in EPS with graphite of low dynamic stiffness, featuring a special grooved pattern, designed to give the optimal balance between thermal and acoustic insulation properties combined with maximum ease of installation.

  •   System for high
    thermal
    insulation
  •   Thermal-acoustic systems
  •   System easy
    to install
  •   System with
    limited
    thickness
  •   System for areas
    exposed
    to impact
  •   System with
    maximum fire
    resistance

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® grafite

Ivas

The ideal option for guaranteeing very high thermal performance, through the use of graphite particles, able to absorb and reflect infrared, thus neutralizing the negative effect of heat irradiation on thermal conductivity. Particularly suitable for upgrading the energy efficiency of existing buildings, with a low thickness it provides thermal insulation values higher than in traditional solutions.

  •   System for high
    thermal
    insulation
  •   System with
    limited
    thickness
  •   System easy
    to install

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® HP

Ivas

The ideal option for high thermal performance that combines reduced thickness and easy installation. Features a special graphite panel with white surface — obtained through a unique lamination synthesis process — that ensures truly uniform thermal properties by combining the performance of graphite with the simplicity and easy installation of conventional white polystyrene. COMPARED TO TRADITIONAL EPS SOLUTIONS, WITH THE SAME THICKNESS APPLIED AND TYPE OF SUPPORT, IT INCREASES OF 19% PERFORMANCE INSULATION thanks to the innovative HP panel (High Performance) combined with state-of-the-art adhesive-skim coat (Klebocem Termico) with thermal conductivity value λ = 0.23W/mK that ensures insulating performance four times greater than a standard adhesive-skim coat (λ = 0.85W/mK).

  •   System easy
    to install
  •   System for high
    thermal
    insulation
  •   System with
    limited
    thickness

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components
gg_share in_share pin_share tw_share fb_share

b2b

enter
img Ivas Industria Vernici Spa
  • Via Bellaria, 40
  • 47030 San Mauro Pascoli (FC) - Italia
  • ph. +39 0541 815811
  • fax +39 0541 815815
  • info@gruppoivas.com
follow us on:
Subscribe to our newsletter:

Please enter your personal details here below to get news about products and apps Fields marked with an asterisk (*) are required

Newsletter

Privacy agreement *

references
download