Ivas Industria vernici

GRAPHITE EPS - Ivas

seo titolo secondo

 GRAPHITE EPS

hai cercato: GRAPHITE EPS indietro 

TermoK8 ® grafite

Ivas

The ideal option for guaranteeing very high thermal performance, through the use of graphite particles, able to absorb and reflect infrared, thus neutralizing the negative effect of heat irradiation on thermal conductivity. Particularly suitable for upgrading the energy efficiency of existing buildings, with a low thickness it provides thermal insulation values higher than in traditional solutions.

  •   System for high
    thermal
    insulation
  •   System with
    limited
    thickness
  •   System easy
    to install

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® grafite PLUS

Ivas

The ideal option for guaranteeing very high thermal performance, even with low thickness, through the use of graphite particles encapsulated inside the special detensioned insulation panel. It ensures dimensional stability, perfect flatness and secure adhesion, even during maximum solar irradiation. The use of a single raw material confers constancy of the thermal properties of the entire thickness of the slab. The absence of any surface processing ensures a truly uniform product when skimming the render, thus ruling out the risk of infiltrations as generally ensuing from skimming and which, in time, could cause crackling of the façade.

  •   System for high
    thermal
    insulation
  •   System easy
    to install
  •   System with
    limited
    thickness

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® HP

Ivas

The ideal option for high thermal performance that combines reduced thickness and easy installation. Features a special graphite panel with white surface — obtained through a unique lamination synthesis process — that ensures truly uniform thermal properties by combining the performance of graphite with the simplicity and easy installation of conventional white polystyrene. COMPARED TO TRADITIONAL EPS SOLUTIONS, WITH THE SAME THICKNESS APPLIED AND TYPE OF SUPPORT, IT INCREASES OF 19% PERFORMANCE INSULATION thanks to the innovative HP panel (High Performance) combined with state-of-the-art adhesive-skim coat (Klebocem Termico) with thermal conductivity value λ = 0.23W/mK that ensures insulating performance four times greater than a standard adhesive-skim coat (λ = 0.85W/mK).

  •   System easy
    to install
  •   System for high
    thermal
    insulation
  •   System with
    limited
    thickness

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® modular d

Ivas

The ideal option for achieving specific customised exteriuiò ue rm itror finishes on the TermoK8® system using modular cladding materials; from rustic brick type finishes to those using ceramic elements in stoneware or clinker.

  •   System for
    modular
    cladding

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® facciavista

Ivas

The ideal option for combining the client’s specific aesthetic requirements with those of a technical nature of the design; exposed brick cladding, with its numerous finishes, gives the system strong emotional impact and a high degree of personalisation.

  •   System for
    modular
    cladding

In collaboration with img img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components


TermoK8 ® a.r. MAX

Ivas

Ideal solution to obtain external surfaces with very high resistance to impact and "mechanical impact" such as hail. The union between the elasticity of the slab and the specifically formulated skim coat confers a crack-free resistance certified beyond the values required by the legislation. It can be used in combination with other TermoK8 systems for the wainscots of buildings and areas exposed to accidental impact or in contact with the ground, as well as those requiring low water absorption.

  •   System for areas
    exposed
    to impact
  •   System with
    maximum fire
    resistance

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® modular big

Ivas

Ideal solution for insulation cladding systems that meet energy efficiency regulations. Features thin layer, large format porcelain stoneware cladding with strong, personal architectural impact.

  •   System for
    modular
    cladding
  •   System for areas
    exposed
    to impact

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® biostone

Ivas

Ideal solution for energy upgrading that meets specific aesthetic requirements in a safe, technically correct manner. The strong personality of this envelope of reconstituted natural stone evokes traditional construction and yet is extremely modern.

  •   System for
    modular
    cladding
  •   System for
    bio-building

In collaboration with img img

 

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® meccanico

Ivas

The ideal option for installing the TermoK8® system on external surfaces where chemical gluing would not guarantee a correct adhesion to the system, ideal for renovating exterior walls in particularly deteriorated condition, without carrying out laborious and onerous preparations.

  •   System for
    deteriorated
    substrates

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® FONOSTOP EPS

Ivas

The ideal option for simply and effectively complying with the regulations on energy efficiency and noise pollution. The system includes an insulation board in EPS with graphite of low dynamic stiffness, featuring a special grooved pattern, designed to give the optimal balance between thermal and acoustic insulation properties combined with maximum ease of installation.

  •   System for high
    thermal
    insulation
  •   Thermal-acoustic systems
  •   System easy
    to install
  •   System with
    limited
    thickness
  •   System for areas
    exposed
    to impact
  •   System with
    maximum fire
    resistance

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

TermoK8 ® HP GREEN

Ivas

Ideal solution for an ethical and sustainable approach to the design of EPS insulation systems. It uses slabs 100% derived from renewable raw materials according to the TUV Certified, “Biomass Balance” method. The Bio Mass contributes to environmental sustainability, guaranteeing the saving of fossil resources and reducing CO2 emissions and greenhouse gases. The finish coating with nanometric technology generates an oxidative photo-catalytic effect capable of decomposing organic substances, pollutants and microorganisms, ensuring surface cleanliness and air quality.

  •   System easy
    to install
  •   System for high
    thermal
    insulation
  •   System with
    limited
    thickness
  •   System for
    bio-building

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components
gg_share in_share pin_share tw_share fb_share

b2b

enter
img Ivas Industria Vernici Spa
  • Via Bellaria, 40
  • 47030 San Mauro Pascoli (FC) - Italia
  • ph. +39 0541 815811
  • fax +39 0541 815815
  • info@gruppoivas.com
follow us on:
Subscribe to our newsletter:

Please enter your personal details here below to get news about products and apps Fields marked with an asterisk (*) are required

Newsletter

Privacy agreement *

references
download