GREY EPS - Ivas
Insulated Renders Insulated Renders

GREY EPS - Ivas

seo titolo secondo

 GREY EPS

hai cercato: GREY EPS indietro 

TermoK8 ® grafite PLUS CONVERTO

Ivas

The ideal option for guaranteeing very high thermal performance, even in thin coats, thanks to the graphite particles contained in the special, unstressed insulation slab. It ensures dimensional stability, perfectly flat surfaces, and secure gluing, even during maximum sunlight. The use of a single raw material ensures that the thermal properties remain uniform throughout the entire thickness of the slab. The absence of any surface cuts ensures a truly uniform product when skimming the external thermal insulation system, eliminating the risk of crackling caused by the infiltration of the skim coat into the cuts themselves.

  •   TermoK8® Design
  •   CAM approved panels
  •   High insulation

  •   Simplicity of installation

  •   Fire resistance

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

GREY EPS - Ivas

seo titolo secondo

TermoK8 ® HP CONVERTO

Ivas

The ideal option for high thermal performance that combines reduced thickness and easy installation. It features a special graphite panel with white surface — obtained through a unique lamination synthesis process — that ensures truly uniform thermal properties by combining the performance of graphite with the simplicity and easy installation of conventional white polystyrene. Compared to conventional EPS solutions, with the same applied thickness and type of substrate, insulating performance increases by 19% due to the innovative High Performance (HP) panel combined with the state-of-the-art adhesive-skim coat (Klebocem Termico) with thermal conductivity value λ = 0,23 W/(m·K) which ensures insulating performance four times higher than a standard adhesive-skim coat λ = 0,85 W/(m·K).

  •   TermoK8® Design
  •   CAM approved panels
  •   High insulation

  •   Simplicity of installation

  •   Fire resistance

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

GREY EPS - Ivas

seo titolo secondo

TermoK8 ® FONOSTOP CONVERTO

Ivas

The ideal option for simply and effectively complying with the regulations on energy efficiency and noise pollution. The system includes an insulation panel made of EPS with low dynamic stiffness graphite, featuring a special grooved pattern, designed to give the optimal balance between thermal and acoustic insulation properties combined with maximum ease of installation and excellent reaction to fire. This option is also characterised by high resistance to impacts (20 joules). Sound insulation certificate

  •   TermoK8® Design
  •   CAM approved panels
  •   High insulation

  •   Fire resistance

  •   Thermo-acoustic insulation
  •   Impact resistance

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

GREY EPS - Ivas

seo titolo secondo

TermoK8 ® a.r. max 20 j

Ivas

The ideal option for external surfaces with very high resistance to impacts and mechanical shocks, such as hail. The combination of the elasticity of the slab and the specifically formulated skim coat provides certified crack-free resistance that exceeds the values required by the regulations.  It can be used together with other TermoK8 systems for building plinths, areas exposed to accidental impacts, areas in contact with the ground, as well as areas that require low water absorption. Impact resistance certificate

  •   Impact resistance

  •   Fire resistance

  •   CAM approved panels
  •   TermoK8® Design
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

GREY EPS - Ivas

seo titolo secondo

TermoK8 ® a.r. max 60 j

Ivas

The ideal option for external surfaces with very high resistance to impacts and mechanical shocks, such as hail. The combination of the elasticity of the slab and the specifically formulated skim coat provides certified crack-free resistance that exceeds the values required by the regulations.  It can be used together with other TermoK8 systems for building plinths, areas exposed to accidental impacts, areas in contact with the ground, as well as areas that require low water absorption. Impact resistance certificate

  •   Impact resistance

  •   Fire resistance

  •   CAM approved panels
  •   TermoK8® Design
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

GREY EPS - Ivas

seo titolo secondo

TermoK8 ® MECCANICO

Ivas

The ideal option for installing the TermoK8 system on external surfaces where chemical bonding would not guarantee the impermeability of the system; ideal for renovating exterior walls in particularly deteriorated condition, without the need for laborious and costly preparation work. Wind resistance certificate

  •   System for deteriorated substrated
  •   Fire resistance

  •   CAM approved panels
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

GREY EPS - Ivas

seo titolo secondo

TermoK8 ® MODULAR FLEX

Ivas

The technical solution for modular façades that is quick and easy to install: lightweight, breathable, flexible, and multi-coloured.

  •   CAM approved panels
  •   Modular design finishes

  •   TermoK8® Design
  •   Fire resistance

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components


GREY EPS - Ivas

seo titolo secondo

TermoK8 ® MODULAR facciavista

Ivas

The ideal option for combining the client’s specific aesthetic requirements with the technical ones of the design; exposed brick cladding, with its numerous finishes, gives the system strong emotional impact and a high degree of personal choice. 

  •   Modular design finishes

  •   TermoK8® Design
  •   Impact resistance

  •   CAM approved panels
  •   Fire resistance

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components


GREY EPS - Ivas

seo titolo secondo

TermoK8 ® modular big

Ivas

Ideal solution for external thermal insulation systems that meet energy efficiency regulations, characterised by cladding in Porcelain stoneware, in thin layers, large format, with a strong and personal architectural impact.

  •   Impact resistance

  •   TermoK8® Design
  •   CAM approved panels
  •   Fire resistance

  •   Modular design finishes

In collaboration with img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

GREY EPS - Ivas

seo titolo secondo

TermoK8 ® MODULAR biostone

Ivas

Ideal solution for external thermal insulation systems that meet energy efficiency regulations, characterised by cladding in Porcelain stoneware, in thin layers, large format, with a strong and personal architectural impact.

  •   Modular design finishes

  •   TermoK8® Design
  •   Impact resistance

  •   CAM approved panels

In collaboration with img img

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

GREY EPS - Ivas

seo titolo secondo

TermoK8 ® modular d

Ivas

The ideal option for achieving specific customised exteriuiò ue rm itror finishes on the TermoK8® system using modular cladding materials; from rustic brick type finishes to those using ceramic elements in stoneware or clinker.

  •   Modular design finishes

  •   TermoK8® Design
  •   Impact resistance

  •   CAM approved panels
  •   Fire resistance

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

GREY EPS - Ivas

seo titolo secondo

TermoK8 ® CLASSICO CONVERTO

Ivas

The ideal option for simply and effectively complying with energy efficiency requirements, providing all the benefits of a quality external thermal insulation system both in construction and in maintenance. 

  •   Cheapness

  •   Simplicity of installation

  •   Fire resistance

  •   CAM approved panels
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

GREY EPS - Ivas

seo titolo secondo

TermoK8 ® MODULAR FLEX L.R.

Ivas

The technical solution for modular façades that is quick and easy to install: lightweight, breathable, flexible, and multi-coloured It is certified as reaction to fire class A2 S1 D0. The insulating panel is EPD (Environmental Product Declaration) certified

  •   EPD certified panels
  •   CAM approved panels
  •   Green building
  •   Fire resistance

  •   Thermo-acoustic insulation
  •   Modular design finishes

  •   TermoK8® Design
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

GREY EPS - Share on Google plus GREY EPS - Share on Linkedin GREY EPS - Share on Pinterest GREY EPS - Share on Twitter GREY EPS - Share on Facebook

b2b

enter
img Ivas Industria Vernici Spa
  • Via Bellaria, 40
  • 47030 San Mauro Pascoli (FC) - Italia
  • ph. +39 0541 815811
  • fax +39 0541 815815
  • info@gruppoivas.com
follow us on:

corporate