COATINGS FOR FOOD INDUSTRY - Ivas

COATINGS FOR FOOD INDUSTRY

| BROCHURE

hai cercato: COATINGS FOR FOOD INDUSTRY indietro

High Thickness Self-Levelling Epoxy Procedure

High thickness, modified epoxy resin based, continuous coating for floors. Pigmented, waterproof, solvent free, with high mechanical and chemical performance. Can be applied to substrates of different physical format, intended for heavy traffic using heavy wheeled vehicles.

Intended for

Interior

food industries
chemical and pharmaceutical industries
mechanical engineering and warehouses
electronic engineering
garages and covered car parks

TECHNICAL DATA

Suitability of the substrate (concrete)
Residual moisture content: < 5%
Compressive strength: > 22 MPa
Surface resistance to tearing: > 1.5 MPa
Total thickness of coating: approx. 3 mm

| system sheet

Composition of the System

1 Stabiliser / Primer Epoxy Fondo
2 Intermediate layer Epoxy Fondo mortar
3 Wear layer Epoplast mortar
4 Protective finish
(if required) polyurethane enamel in water dispersion: Metroresin Matt K or Metroresin Gloss K or solvent based Paviglass
(matt or glossy)

Products of the System

Self-Levelling Water-Based Epoxy Procedure

High Thickness, continuous coating for self-levelling/multi-layer flooring, with modified epoxy resin in aqueous emulsion. Pigmented, waterproof. Superb mechanical and chemical performance, with smooth or antiskid surface.